Design Vogue

• Popular appearance

• Durable

• Colorfast

• Heavy and dense

• Hard to cut

• Difficult to source

Structural Use

Manufactured veneer stone is too weak to be used structurally for building purposes. Veneer stone can hold up its own weight, but it cannot carry additional weight. Veneer stone is never used for flooring. Real stacked stone is never found with veneer stone since veneer stone is just that: a veneer. However, veneer stone can successfully mimic the look of stacked stone.

Natural stone can be used structurally, though this is becoming a rare practice in modern building. When you want authentic stacked stone, you must use natural stone. Some natural stone, such as slate, is too brittle for structural uses. Natural stone, such as travertine, is commonly used for pathways, flooring, and walls.

Size, Weight, and Thickness

Full-dimension veneer stone starts at around two inches thick and increases to around six to eight inches thick. A sub-category called thin stone veneer ranges from 1-inch to 2-inch thick. Veneer stone face sizes can be as large as 14 inches in diameter. Veneer stone is about half the weight of natural stone of the same size.

Natural stone on the wide consumer market mostly comes in two sizes. Full-size blocks approximately the size of one or two retaining wall blocks can provide full-dimension coverage and the stacked look that many homeowners desire. For a veneer-style cover, natural stone is quarried and then cut into slices with an industrial-size, similar to a wet tile saw.

Though veneer, this is still 100-percent natural stone and measures about 3/4-inch to 1 3/4-inch thick. Face sizes for natural stone depend on the type of stone but tend to stop at around 18 inches in diameter. Natural stone is far heavier than veneer stone. For example, natural fieldstone is about 13 pounds per square foot, more than twice the weight of manufactured veneer stone.

Appearance and Color Fastness

Veneer stone's colors can fade over time. Inexpensive, inferior manufactured stone can be a tempting purchase, but often, its appearance is lacking. It can have highly repetitive patterns (or monochromatic colors) and be as little as one inch in thickness. Be sure to read the manufacturer's specifications before purchasing and order samples. With veneer stone, quality tends to be consistent.

Natural stone is never repetitive, and generally it has a pleasing appearance. Quality can sharply vary, though. Natural stone's colors can fade with sunlight but at such slow rates that it will not be noticed within a person's lifetime.

Installation Procedures

Manufactured veneer stone installs with lath, a scratch coat, mortar, and grout or no grout for the dry-stack appearance. In terms of installation, the main differences between manufactured veneer stone and natural stone are weight and density. Manufactured stone is far easier to handle and to cut than natural stone because it is porous and lightweight. Manufactured veneer stone lends itself to do-it-yourself installation more so than does natural stone.

Natural stone can be installed directly on porous concrete, stone, or block. If the surface is smooth, you can attach metal lath and a scratch masonry coat to provide a surface for thin sheets of stone to grip. Grout is added between the stones. Alternatively, the stones can go grout-free for a dry-stack appearance. Natural stone cannot be installed on drywall or other thin materials. Due to its density, natural stone is difficult to cut.

Manufacturers and Suppliers

The list of manufactured veneer stone companies increases all the time as the popularity of this product increases. Well-known manufacturers of veneer stone include:

• Boulder Creek Stone Products
• Coronado Stone Products
• Cultured Stone (Boral America)
• El Dorado (Boral America)
• Stonecraft (Boral America)

Suppliers of natural stone tend to be local since the cost of shipping to individual buyers can be prohibitive.

Should You Install Veneer Stone or Natural Stone?

Why use man-made veneer stone if the resulting product is more homogeneous than natural stone? And why do this if the installation process is roughly the same between the two?

Predictability is one reason why DIYers prefer manufactured veneer stone over natural stone. Manufactured veneer stone comes in predictable sizes that are easy to carry, cut, and hang. For faster installation, some manufactured stone products install as larger square panels (2-foot by 2-foot) and with no need for mortar or grout.

For high-end or historically accurate installations, natural stone may be your best choice.